YYST 54" Battery Tie Down Strap Kit Battery Hold Down Strap with stainless steel 316 Buckle, 2 Stainless steel 316 Eye Strap Mounts, 4 SS Screws

FREE Shipping

YYST 54" Battery Tie Down Strap Kit Battery Hold Down Strap with stainless steel 316 Buckle, 2 Stainless steel 316 Eye Strap Mounts, 4 SS Screws

YYST 54" Battery Tie Down Strap Kit Battery Hold Down Strap with stainless steel 316 Buckle, 2 Stainless steel 316 Eye Strap Mounts, 4 SS Screws

RRP: £18.96
Price: £9.48
£9.48 FREE Shipping

In stock

We accept the following payment methods


Sony Cyber-shot DSC-RX100 VII Camera Case and Strap, Ultra Light Maximum Protection Camera Case, Padded Camera Cover Replacing the battery tray and holds downs is a relatively easy process. We say “relatively” because the old tray and bolts can be difficult to remove depending on the amount of corrosion on them. Here are the basic steps to replacing the old battery tray and hold-downs and installing the new one. Removing the Old Tray Installing the new tray is the easy part compared to removing the old one. Before installing the new tray, inspect all of the parts it will attach to, and replace them before continuing. Now, you are ready to install the new battery tray.

As you can see from this Buyer’s Guide, many different tie-down systems and options are available. The type that is right for you depends on whether it is for car, motorcycle, marine, boat, or commercial vehicle use. This strap set is suitable for marine, RV, and other recreational uses. The nylon is made to be resistant to UV light, which will also improve the product’s longevity. It is recommended that you inspect your battery straps regularly because even the best ones will eventually wear out. This set is an affordable option to keep your battery safe and secure. Pros The question is when it is time to replace the battery tray and hold-downs. The rule of thumb is that you should replace them as soon as possible when you see flaking metal and rust. Flaking metal means that the component is losing metal, and a failure is imminent as it continues to lose structural integrity. It is best to find as many bolt holes as possible, using a minimum of four. You might have to drill new holes on rare occasions, but this should be avoided, if possible. Make sure that all of the bolts are tight.Several factors are enemies of the components that hold the battery in place. Batteries are made from a combination of lead plates and acid. While this is good for storing electricity, it is not good for metal plates. Leaky batteries cause corrosion to develop on the battery tray and hold-downs. Road salt splashing onto the bottom of the plate is another factor that speeds corrosion. Today, you have many options for material and tie-downs for battery holders. You can find them in metal, plastic, metal/nylon, and many other options. The most common material for the battery holder itself is stainless steel. You will also find some that are chrome-plated aluminum or steel. These materials are good because they help resist rust for a longer time. Some manufacturers also anodize or paint their battery trays to help with rust prevention. Powder-coated metal ones last longer than painted metal surfaces. ANALOG WRISTWATCH, BATTERY Operated Watch, Stylish Luxury Designer Roman Numerals Wristwatch With Calfskin Leather Strap

The process of charging and discharging the battery also contribute to corrosion. As the battery charges and discharges, hydrogen gas is released into the atmosphere. The hydrogen surrounding the battery creates an environment that promotes the rapid growth of corrosion. These factors lead to corrosion and deterioration of the battery tray and components that hold it down. When should you replace the battery tray, tie-downs, and straps? Once you have successfully removed all of the old bolts and tray, clean out all of the holes with sandpaper, a file, or lubricant to get them ready for the new tray. When doing this, make sure not to file away too much metal. If you do, then the new tray will not fit securely and could be loose. Installing the New Tray Thermoplastic trays are used in marine environments because the saltwater poses an additional risk for corrosion. These might also be a good choice in areas where road salts splash onto the underneath of the battery tray. One thing to be aware of with some plastic ones is that they can become brittle in cold weather. They can break down faster in UV light. Some battery tray manufacturers use plastics that are made to withstand these conditions. Gravier heroes - drone driver's license according to EASA specifications with QR code, flag or photo ID, as a credit card, printed in high quality with 600dpi Women's watch Tie-up watch Fabric watch Fabric bracelet watch Ribbon watch Women's fabric watch Liberty Thorpe autumn Mother's Day gift

We recommend this crossbar holder because it can adjust to many different sizes of batteries. If you recently replaced your battery tray, this holder assembly will be adjusted to fit. It holds the battery securely, and it has a durable feel. Personalize gift Wood Watches for Men Leather Strap & Colored Dial| Unique Engraved Wooden Man's Watches | Anniversary Gift For boyfriend If you need to replace your entire battery tray, this is a good choice. Whether you want to replace your old battery with one from a different battery group or your battery tray is worn out, this is a quality universal tray. It is made from stainless steel and includes everything that you need to put it in place and install the battery. It is recommended for marine use. Recommendation Over time, all battery trays will corrode and fail. If they fail, battery acid can leak on other components, such as the chassis or radiator supports. If corrosion works through the hold-downs and straps, the battery can fall out and cause significant damage. These are some good reasons to inspect them regularly. Once a year and every time you change the battery, take a look at these components.

Watch for men | Leather Watch | Anniversary Gift | Fiancé Gift Watch | Wedding Gift for Husband | Gift for Him The Halfords Battery Clamp is adjustable and can be used on any type of battery mount, making it a universal fitting. It is easy to fit- simply screw into place and secure your car's battery in place. Features & Benefits: It is normal to see some corrosion on the battery plate and ties, but it is a good idea to replace them as soon as possible if it is more than on the surface. Signs of corrosion can appear as flaking paint, a white powdery buildup, and flaking metal. Rust is the most obvious sign. Removing the old tray sounds easy. You loosen the old bolts and lift the tray out, but rust and bolts seldom make for an easy job. Here are a few tips for getting the old, rusted bolts out and removing the old tray.The battery tray is exactly what it sounds like. It is a tray that the battery sits on. The battery is held in place with a set of metal tie-downs, and bolts go through holes in the battery tray or a set of straps. The purpose is to keep the battery in place, but it also reduces engine and road vibration on the battery, reducing the battery’s performance. Why do battery trays and tie-downs need to be replaced?

The Uriah products adjustable, universal crossbar battery hold down is an excellent replacement for an original crossbar hold down that is no longer usable, or when you want an upgrade. This one uses L-bolts and can adjust to anywhere between 5.5 to 8.5 inches. The top hold down bolt has an adjustable length of up to 8-inches. It will fit most battery groups, even many odd sizes. It is durable and has a heavy feel. This crossbar will work with many replacement battery trays on a variety of makes and models of vehicles. Recommendation Locate a minimum of two bolt locations to begin securing the tray. It is best to find the ones that are across the short measurement, if possible. When you choose a universal one, the battery tray, strap, bolts, tie-down strap, and other components are made to fit the most common mounting positions. Metal, plastic, and mixed material universal trays all have similar cutouts for bolts and mounting hardware. Final Thoughts Try to move the tray in all directions to make sure that it does not move at all. It should be firmly in place. If any movement is detected, then go over all of the bolts to make sure that they are tight.

Keep collections to yourself or inspire other shoppers! Keep in mind that anyone can view public collections - they may also appear in recommendations and other places.

  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns


Address: UK
All products: Visit Fruugo Shop